Purchase a Bootloader Unlock Code for your Huawei MediaPad M5
Today, here we are going to tell you how to unlock the bootloader of your Huawei MediaPad M5 device. For quite a long time, the Fastboot method was one of the easiest ways to unlock the bootloader of any Huawei handset. However, all good things come to an end, isn’t it? Huawei has one day officially stopped supporting bootloader unlock. If you’re still interested in unlocking the bootloader, you will be forced to use a third-party service for your MediaPad M5, but at least it is not impossible.
Your handset therefore comes with a locked bootloader because the OEM wants its device’s integrity to stay top-notch. But that’s how things really go. Unlocking the bootloader of your MediaPad M5 is the first thing to do if you want to root your device or want to install a custom ROM or any other flashable files.
You can then flash modified system, boot, kernel, install a custom recovery at your choice or other .img files on your device. So, you have no other choice but to pay for getting what you want. Earlier, this was free, but now users need to spend up to $60 to get an unlock code.
You should start the unlock operation from below only after charging the battery of your Huawei MediaPad M5 and taking an appropriate backup. Also go to your Settings –> System -> About Phone. There, tap on the Build Number 7-8 times until you see a toast message “Developer option enabled“. And no less important, go to Developer option in the settings and enable OEM unlock.
Remember that AndroidFlaghsip will not be held responsible for any kind of damage occurred to your Huawei device while following this tutorial. Do it at your own risk.
Purchase a Bootloader Unlock Code for your Huawei MediaPad M5:
- Get your Bootloader Unlock code from FunkyHuawei;
- Then, open the ADB and FASTBOOT folder and open the command window / PowerShell;
- Turn off your device;
- Your next step is to boot into fastboot mode. The adb reboot bootloader may help;
- Then, you can unlock your device’s bootloader with this command line: fastboot oem unlock ******;
- Make sure to replace the ****** with the FunkyHuawei code;
- Once it is done, you can reboot the phone.
